Sprinkle Cake – Bead Yarn & Spatula

Earlier this summer a new cake trend began flooding my Instagram feed… A Fault Line Cake. Initially I thought it would be extremely difficult to create. And I am sure some of the ones I have seen are – ones with macaroons, lemons, edible decorative paper and so forth – but, the one that caught my eye and seemed somewhat easy to practice on was a sprinkle one. Essentially, the center of the cake exposes a design between two thick layers of frosting. Sort of like a fault line separating after an earthquake and exposing the ground beneath.

I first attempted this trend a few weeks ago and it was a complete DISASTER! Since I was just trying out the technique I attempted to take some short-cuts… mainly use store bought frosting. Chocolate frosting at that and I really should have known better. Not that there is anything wrong with store bought frosting – I have used it quite often to decorate – but, it was hot outside (and inside my house) and I have learned that store bought frosting just doesn’t hold up as well in the heat as homemade. Also, I made a six inch cake using boxed cake mix thinking that would give me enough height for the cake and I was wrong on that account as well.

Here’s what happened… I baked a yellow cake mix into a two-layer 6-inch cake and it came out just fine. Then, I started to frost it and the issues began. Like I said it was hot on this day so I decided to refrigerate the frosting for about 20 minutes so it could firm up a little. Once it was firm, I started by crumb coating the cake and it just wasn’t going on smooth, but, I plowed ahead. Once I finished with the crumb coat I placed the cake in the refrigerator so it could set. After about a half hour I removed the cake from the refrigerator and attempted to add more frosting to the middle of the cake to adhere the sprinkles and it was a mess. The crumb coat never got a crust on it so when I added more frosting it was all just coming off. I continued and finally got a layer of frosting around the middle of the cake and then added the sprinkles. But, since I had to add such a thick layer of frosting to the cake to get it to adhere my sprinkles got swallowed up by the frosting. It was such a fail. At this point I just gave up. I realized that the frosting was just not going to cooperate and that the cake didn’t have enough height to look good.

Fast forward a few weeks later and with a free weekend ahead of me I decided to try once again. I made some tweaks this time though. I decided to make a three-layer 8-inch cake and for the frosting I whipped up two batches of Martha Stewart’s Fluffy Vanilla Frosting. It’s my go-to frosting whenever I have to decorate a cake. It has a great consistency that makes it perfect for frosting, piping and/or tinting.

I opted to go with a box cake mix again. I used a yellow cake mix to make two 8-inch layers and then a chocolate mix to make one 8-inch layer. I used the remaining chocolate batter to make 6-inch cake.

Once the cakes were done I let them cool in the pans for about 15 minutes and then transferred them to a wire rack to cool completely. I then wrapped them in plastic wrap and placed them in the refrigerator overnight. I used to just leave my cakes out at room temperature, but, I have found that refrigerating them makes it easier to torte, layer and frost.

The next day I made two batches of vanilla frosting and my short-cut chocolate mousse (beat a package of Jell-O chocolate pudding mix along with a cup each of heavy whipping cream and whole milk until thick). I then torted and layered the cake, filling the layers with the chocolate mousse. Next I crumb coated the cake and placed it in the refrigerator for about a half hour.

After the half hour I removed the cake from the refrigerator and added an extra layer of frosting in the middle of the cake…

And then added sprinkles to that layer of frosting.

I then placed the cake back in the refrigerator for another half hour so the frosting and sprinkles could set.

I transferred frosting to a piping bag and snipped the end off and piped the frosting around the cake, except for the part with the sprinkles.

I then smoothed the frosting and added some 1M swirls on top of the cake and sprinkled them with sprinkles and my cake was done. I finally created a successful Fault Line Cake. I wonder what new cake trend will be flooding my Instagram feed next.

Happy Halloween! So, will any of you be dressing up today? I can’t remember the last time I dressed up. These days I prefer to dress-up my baked treats with a Halloween theme. And this year, I made a Halloween themed Sprinkle Cake. If you’re wondering, a sprinkle cake is exactly what it sounds like. A cake covered in sprinkles. What’s fun and great about them, they work for any occasion… you just have to change the color of your sprinkles and you are all set.

I started off by baking, crumb coating and frosting my cake – getting it as smooth as possible. I opted to use a box cake mix – Pillsbury’s Halloween Funfetti Cake Mix – and store bought vanilla frosting – Betty Crocker Vanilla Frosting. Since I wasn’t all that sure how many ounces of sprinkles I was going to need – I had a rough idea -and because I was planning on rolling the cake in a bed of sprinkles I opted to keep it small – 6 inches.

Speaking of the sprinkles… I order nonpareils – basically tiny balls of sprinkles – in purple, orange and black from NY Cake. I did a little research and they had the colors I wanted at the best price. I also ordered the green cupcake liners I used for the Cupcake Bouquet I made back in May from them. I went to their shop once in NYC and at the time I was just wandering around aimlessly looking at things. Since I decorate cakes more often now I am sure I would make the most of my next visit.

Next, I emptied the sprinkles onto a rimmed baking sheet and mixed them together. Let me just apologize now for my pictures. I need to stop baking and decorating at night and also on rainy days. Well, I can’t control the rainy days, but, I could definitely pick better times to start my baking/decorating projects.

To efficiently cover the cake in sprinkles I opted to roll the cake in the sprinkles. To do so, I placed a cake board on top of the cake, as well as the bottom, and simply rolled the cake in the sprinkles back and forth until it was covered. I used a spoon to cover any small spots I may have missed. To cover the top, I carefully removed the cake board and spread more frosting on it and poured handfuls of the sprinkles over it. To remove any excess sprinkles, I carefully tilted the cake to the side and tapped the bottom cake board so they could fall off.

Now it was time for a little more decorating. I’ve been seeing a lot of cakes on Instagram with a chocolate drizzle and I have been wanting to try it myself. I decided that this cake would be perfect for that. I made a chocolate ganache – the same one I made for the Pumpkin Crepe Cake – and poured it into a decorating bottle. I let the ganache sit for a few minutes so it would thicken up but still be pourable. You don’t want to pour it too soon or you’ll end up with a runny mess on your cake. I put it in a decorating bottle because I was only planning on decorating the edges of the cake and the sides, but, if you want to cover the entire top of the cake you could pour the ganache in the middle of cake and then use an offset spatula to smooth it out and let it drip down the sides.

After that, I tinted some of the remaining vanilla frosting a light orange color and piped a border around the bottom of the cake and used a large star tip to decorate the top. And finally placed a bat and a few creepy crawlers – spiders – on the cake for a final touch.